Table of Contents
Advertisement
Removing/attaching the stand
The stand can be removed when storing the display on a rack or display shelf.
CAUTION
• Use a flat, clear surface when attaching/detaching the stands.
• The display can tip over if the stand has not been attached.
• Avoid touching the screen during this step as it may damage it.
Detaching
1 Place the display with the screen facing down on a soft cloth or cushioning material that is larger than the
display.
2 Remove the mounting screws (x 2) from the left and right stands.
• Do not lose the removed screws. Do not use these screws for other purposes.
Attaching
1 Place the display with the screen facing down on a soft cloth or cushioning material that is larger than the
display.
2 Align the position of the stand and screw hole on the video display.
• Alight the convex part of the stand and concave part of the video display.
3 Fix the left and right stands using the mounting screws (x 2).
Rear
Screen side
Concave part
Stand mounting screw hole
Installation/Connection
Mounting screw
Convex
part
Stand
13
Advertisement
Table of Contents
