Table of Contents
Advertisement
OSD Menu
Sub Menu
Color Temperature
46
Color Gamut
Gamma
Start
14
Copy Picture Mode
Picture Mode
Execute
Picture Mode Name
Anchor Adjustment
D93, D65, D61, D60,
Sets the target color temperature.
D56, D50, DCI-P3
Custom (xy)
[D93], [D65], [D61], [D60], [D56], [D50], [DCI-P3]: Select from preset color
• When Custom (xy) is
[Custom (xy)]: Adjusts CIE x and y. (Increments of 0.001)
selected
x: 0.260 to 0.360
(0.313)
y: 0.260 to 0.360
(0.329)
SMPTE-C
Sets the color gamut.
EBU
ITU-R BT.709
ITU-R BT.2020
Adobe RGB
DCI-P3
2.2, 2.35, 2.4, 2.6,
Sets the target gamma.
ITU-R BT.1886
Performs calibration.
When [Picture Mode]
[User 1–7]
Copy the Picture Mode settings.
Select the Picture Mode.
SMPTE-C
EBU
ITU-R BT.709
[User 1–7]: Select from other than the currently set mode.
ITU-R BT.2020
Adobe RGB
DCI-P3
User 1 (2020 PQ)
User 2 (2020 HLG)
User 3 (DCI PQ)
User 4 to User 7
Performs copy.
You can change the name of [User 1–7] within 16 characters including
alphabetical characters, numbers, and symbols.
OK
Temporarily saves parameters for adjusting [Contrast], [Brightness],
Cancel
[Chroma], [Sharpness], and [HDR Range] and recover the values (anchor
point setting).
[OK]: Performs anchor point setting.
[Cancel]: Returns to the previous screen without setting anchor point.
Setting Options (Bold: factory default)
temperatures.
Advertisement
Table of Contents
