Table of Contents
Advertisement
l Enable the auto provisioning in gateway
l The ACS has been prepared
l The network between gateway and ACS is connected
Configuring gateway
Usually, the feature is disabled before being on sale. To activate the auto provisioning function, please follow the procedures as below.
Step 1 On the
ADVANCED
->
Step 2 Enable the 'Enabled' option and select ACS. DHCP option 66 can be enabled if ACS has been work as DHCP server, otherwise please
select protocol of provisioning and fill the value of '
purpose of system safety. Do not forget to select Firmware upgrade, upgrade mode and fill the value of timeout, and click '
Step 3 Set interval of checking in
Options
Definition
Enabled
Whether to enable or disable Auto Provision
DHCP Option 66
Get ACS server address from Option 66 via DHCP
Protocol
Set protocol of connection
Auto Config Server
The config server domain or IP address
URL
User Name
The account of downloading from ACS
Password
The password of downloading from ACS
Timeout
The max limit time for downloading firmware
Firmware Upgrade
Enable/disable the mode of downloading firmware
Upgrade Mode
Select upgrade time.
Power: start upgrade configuration when Power on. Power + Period: Set the frequency of checking the latest
configuration when gateway running
Options
Definition
Enable
Whether to enable or disable system notice
Check Interval
When Upgrade Mode is set, this parameter specifies the interval of Checking.
Auto Provision interface
Auto Config Server URL
LOGS System notice
->
then enable it, and click '
Table 7-4-1 Definition of Auto Provision
Table 7-4-2 Definition of system notice
'. Username and password may need to be filled in FTP/HTTP for the
Save'
.
Save'
.
Advertisement
Table of Contents
