Table of Contents
Advertisement
User
Permission to send and receive UserEvent.
Config
Ability to read and write configuration files.
DTMF
Receive DTMF events. Read-only.
Reporting
Ability to get information about the system.
Dialplan
Receive NewExten and Var Set events. Read-only.
Originate
Permission to originate new calls. Write-only.
All
Select all or deselect all.
Once you set like the above figure, the host 172.16.100.110/255.255.0.0 is allowed to access the gateway API. Please refer to the following figure
to access the gateway API by putty. 172.16.100.110 is the gateway's IP, and 5038 is its API port.
Figure 7-1-2 Putty Access
Asterisk CLI
In this page, you are allowed to run Asterisk commands.
Figure 7-2-1 Asterisk Command Interface
Advertisement
Table of Contents
