Table of Contents
Advertisement
Figure 5-1-6 Failover Call Through Number
You can add one or more "Failover Call Through Numbers".
Groups
Sometimes you want to make a call through one port, but you don't know if it is available, so you have to check which port is free. That would be
troublesome. But with our product, you don't need to worry about it. You can combine many Ports or SIP to groups. Then if you want to make a
call, it will find available port automatically.
Figure 5-2-1 Establish Group
6. Network
On "Network" page, there are three sub-pages, "WAN Settings", "DDNS Settings", and "Toolkit".
WAN/LAN Settings
There are two types of WAN port IP, Static and DHCP. Static is the default type, and it is 172.16.100.1. The LAN port is a fixed IP and it is
192.168.100.1.
Advertisement
Table of Contents
