Table of Contents
Advertisement
mfcr2_mfback_timeout
mfcr2_metering_pulse_timeout
4.VOIP
VOIP Endpoints
SIP Endpoints
This page shows everything about your SIP, you can see status of each SIP.
Main Endpoint Settings
You can click
on.
There are 3 kinds of registration types for choose. You can choose Anonymous, Endpoint registers with this gateway or This gateway registers
with the endpoint.
You can configure as follows:
If you set up a SIP endpoint by registration "None" to a server, then you can't register other SIP endpoints to this server. (If you add other SIP
endpoints, this will cause Out-band Routes and Trunks confused.)
Figure 4-1-2 None Registration
For convenience, we have designed a method that you can register your SIP endpoint to your gateway, thus your gateway just work as a server.
MFC/R2 value in milliseconds for the MF timeout
Figure 4-1-1 SIP Status
button to add a new SIP endpoint, and if you want to modify existed endpoints, you can click
MFC/R2 value in milliseconds for the metering pulse timeout
butt
Advertisement
Table of Contents
