Table of Contents
Advertisement
Table 7-2-1 Definition of Asterisk CLI
Options
Definition
Command
Type your Asterisk CLI commands here to check or debug your gateway.
If you type "help" or "?" and execute it, the page will show you the executable commands.
Asterisk File Editor
On this page, you are allowed to edit and create configuration files.
Click the file to edit.
Figure 7-3-1 Configuration Files List
Click "New Configuration File" to create a new configuration file. After editing or creating, please reload Asterisk.
Auto Provisioning
Auto provisioning or auto-configuration is an easy, flexible and time-saving way to upgrade firmware and configurations for E1 gateways in mass
deployment. With auto provisioning, all user information can be entered via the central ACS (Auto Configuration Server). ACS can be DHCP
server or TFTP, HTTP and FTP server. It will not take effects immediately but in the next time system is power on. It could be postponed the
execution of restart system also.
Note that system will not be upgrade the firmware and update configurations if the connection between ACS and gateway is disconnect.
Preparation
The following should be prepared before anto provisioning being applied.
Advertisement
Table of Contents
