OpenVox DGW-1004 User Manual page 24

Figure 4-1-6 Edit IAX Endpoint "9001"
Table 4-1-6 Definition of IAX2 Endpoint
Options Definition
Name A name which is able to read by human.
And it's only used for user's reference.
User name User name the endpoint will use to authenticate with the gateway
Password Password the endpoint will use to authenticate with gateway.
Allowed characters
Registration Whether this endpoint will register to this gateway or this gateway to the endpoint.
Hostname IP address or hostname of the endpoint or 'dynamic' if the endpoint has a dynamic IP address. This will require registration.
or IP
Notice: If the input here is hostname and your DNS has changed, you must reboot asterisk.
Address
Auth Authentication method for connections
Transfer Disable or not IAX2 native transfer
Trunk Use IAX2 trunking with this host
Qualify Whether or not to check the endpoint's connection status.
Qualify Use an average of the last two PONG result to reduce falsely detected LAGGED host. The default is 'no'.
Smothing
Qualify How frequently to ping the peer when everything seems to be OK, in milliseconds.
Freq Ok
Qualify How frequently to ping the peer when it's either;
Freq not Ok
LAGGED or UNAVAILABLE, in milliseconds.
Port The port number the gateway will connect to at this endpoint.
Encryption Enable IAX2 encryption. The default is no.
Force Force encryption insures no connection is established unless both sides support encryption. By turning this option on, encryption
Encryption is automatically; turned on as well. The default is no.
Trunk Max Defaults to 128000 bytes, which supports up to 800; calls of ulaw at 20ms a frame.
Size