Secondary Transmission Ratio - GAS GAS Enduro 2T 250 2018 Owner's Manual

Enduro series
Table of Contents

Advertisement

Owner's Manual

Secondary transmission ratio

Suspension setting
kyb
1
Suspension setting
force
suspension travel
secondary transmission ratio can be modified by changing the front and/or rear
sprockets.
The available sizes of sprockets in gas gas are as follows.
Rear sprockets: 39, 40, 42, 44, 46, 47, 48, 49, 50, 51, 52.
front sprockets: 12, 13.
if the ratio is shortened, your gas gas will lose top speed but gain in acceleration
and at low speeds will be more manageable on difficult terrain.
note: pay attention to engine rpm.
if the ratio is extended, your gas gas will gain top speed but will lose acceleration
and manageability at low speeds.
availaBle SettinGS
your motorcycle has adjustable suspensions, these adjustable settings are:
front fork (Kyb)
Rebound (3) - located at the bottom of the fork.
compression (2) - located at the top of the fork.
2
air purge (1) - located at the top of the fork.
oil volume - 350 ml. (kyB 010m oil)
3
The volume of the oil in the fork, affects the level of the same inside and may be
adjusted. a change in the volume, and therefore of the oil level will not affect the
High level
first part of the suspension travel, but it will affect the final part.
standard oil
When the volume/oil level is increased, the suspension is more progressive and
level
the action of the front fork is harder at the end of the travel.
Low level
When the volume/oil level is lowered, the suspension is less progressive and the
action of the fork is less hard at the end of the travel.
if it is fork bottoming, it is recommended to slightly increase the oil level (approx
10 ml.).
End of
travel
Make sure that both fork bottles have the same volume/oil level for regular
performance.
WarninG
-62-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents