GAS GAS Enduro 2T 250 2018 Owner's Manual page 47

Owner's Manual
Maintenance
1
2
3
5
6
changing the rear brake pads
To change the rear brake pads follow these steps:
1. Remove the pin protector (1).
2. Loosen and remove the pin (2).
3. Remove the pads (3).
4. keep the metal plate (4) and the fibre plate (5) in case the new pads do not
have them.
4
5. Loosen the screws (6) and remove the cap of the brake fluid tank.
6. put a paper or cloth around the brake fluid tank to prevent it from falling.
7. Retract the calliper piston so as not to damage it.
8. install the new brake pads
9. attach the pin and its protector.
10. Replace the cap of the tank.
11. operate the brake pedal several times until you get the proper feel.
-47-