Running-In Period; Transmission Oil - Checking The Level - GAS GAS MC Boy 50 User Manual

I

Running-in period

7
Care of the engine during the first hours
of use is vital for obtaining the best from
your motorcycle.
Therefore, we recommend:
- Strictly observe the oil and petrol ratios shown,
and use the recommended 2T oil – see section "Fuel
- petrol/oil mixture", page 7.
- In the first hour of use, keep the engine at a moderate
turnover speed (never go to maximum turnover).
- Constantly change the speed, by opening and
closing the throttle alternately.
C
recently, wait a few minutes before checking the
level.
Note: the motorcycle should be perpendicular
to the ground.
Warning: Place a suitable recipient under the
engine to collect possible oil spillage.
- Remove the oil level screw (A).
The level is correct if it reaches the lower edge
of the oil level hole (A). If the level is lower then
more oil must be added.
8
11
- -
Transmission oil – Checking the
level
If the motorcycle has been used
A