Front Suspension - GAS GAS Enduro 2T 250 2018 Owner's Manual

Owner's Manual
Maintenance
1
1
4
5

30.-frOnt SuSPenSiOn

front suspension air purge
To purge the air from the front suspension follow these steps:
1. place the bike on an easel or stable support. The front fork must be fully
extended.
change of fork spring
in case you need to change the front fork spring, follow these steps:
1. Remove the bar from the suspension flanges.
2. Loosen the upper nut of the fork.
3. Remove the inner oil from the fork.
4. Loosen the lower nut of the fork.
3
5. Remove the inner cartridge.
4
6. Remove the spring.
Replace the spring and follow the steps in reverse order to assemble it.
make sure that the brake and clutch fluid tanks are always vertical, otherwise
both systems must be bleed again.
5 6
WarninG
-50-