GAS GAS Enduro 2T 250 2018 Owner's Manual page 39

Owner's Manual
Maintenance
2
Cleaning the filter
1. clean inside the filter box with a damp cloth (1).
2. Remove the cage (2) from the air filter (3).
3. clean the filter in a liquid bath for cleaning filters using a soft brush.
4. squeeze and dry with a clean cloth. do not touch the filter or ventilate it,
because it can become damaged.
5. install the filter in the cage and cover the filter lip (4) with a thick layer of
grease to ensure the closure and prevent dirt from getting in.
a clogged air filter allows dirt to enter the engine causing excessive wear and
1 damage.
inspect it without fail, before and after each race or session. clean if necessary.
clean the filter in a ventilated area and make sure there are no sparks or flames
near the work place (include a powerful light bulb). do not use petrol to clean the
filter as this may cause an explosion.
• inspect the filter for damage. if it is damaged replace it or dirt will get into
the carburettor.
• grease all air filter connections and screws and inlets.
3
4
DanGer
WarninG
-39-