Final Installation Steps - MGE UPS Systems Galaxy PW 30 kVA Installation Manual

Connection of the LED indications unit
This unit connects to the XR4 and XR5
connectors (see the position of the
board in the figures in the "connection
of "Media Contacts 11" standard
auxiliary circuits" section).
For information on unit installation and

Final installation steps

After making the connections:
install the front and rear base plates
of the cubicles, clipping them to the feet
of the cubicles (unless the connecting
cables are fed through these openings);
refit the terminal shields of the
terminal blocks, switches and circuit
breakers.
(optional)
details on connections to the unit, see
the manual included with the LED
indications unit, document No.
5102990400.
the recommended cable cross-
2
section is 1 mm .
Installation (cont.)
(qualified personnel only)
- 29
E-51028231XU/BH