2 INSTALLATION
2.1 GENERAL INSTALLATION
The Zennio Motion Detector needs to be connected to any of the available input ports
of the Zennio device (please refer to the specific user manual of the target device for
further details).
Once connected to the device, the detector needs no further electrical power; it will be
ready to function once the Zennio device gets programmed.
Figure 2 and Figure 3 show the main elements of the device:
LED Indicator (A): LED light that will blink in red colour when motion is
detected.
The luminosity levels are obtained from the light that strikes this hole.
Detection Cell (B): cell for the motion detection.
http://www.zennio.com
A
B
Figure 2. Element Diagram (models ZN1IO-DETEC and ZN1IO-DETEC-N)
A
B
Figure 3. Element Diagram (models ZN1IO-DETEC-P and ZN1IO-DETEC-X)
C
E
D
C
E
D
Technical Support:
Motion Detector
A. LED Indicator.
B. Detection Cell.
C. Connection Terminal.
D. Double Microswitch.
E. Metal Clamp.
A. LED Indicator.
B. Detection Cell.
C. Connection Terminal.
D. Triple Microswitch.
E. Metal Clamp.
http://zennioenglish.zendesk.com
6