Typographical Conventions; Warning Signs; Note Signs; Representation Modes - JUMO LOGOSCREEN nt Interface Description

1 Introduction

1.2 Typographical conventions

1.2.1 Warning signs

E

1.2.2 Note signs

1
abc

1.2.3 Representation modes

0x0010
6
The symbols for Danger and Caution are used in these operating instructions
under the following conditions:
Danger This symbol is used when there may be danger to personnel if
the instructions are ignored or not followed correctly!
Caution This symbol is used when there may be damage to equipment
or data if the instructions are ignored or not followed correctly.
Caution This symbol is used where special care is required when
handling components liable to damage through electrostatic
discharge.
Note This symbol is used when your special attention is drawn to a
remark.
Footnote Footnotes are remarks that refer to specific points in the text.
Footnotes consist of two parts:
A marker in the text, and the footnote text.
The markers in the text are arranged as continuous superscript
numbers.
Hexadecimal A hexadecimal number is identified by being preceded by an
number "0x" (here: 16 decimal).