Typographical Conventions; Warnings; Notes - JUMO Logoline 500 junior Operating Manual

1.3

Typographical conventions

1.3.1 Warnings

1.3.2 Notes

1 About this Manual
V
Danger This symbol is used when there may be

Warning This symbol is used when there may be
E
Warning This symbol is used where precautions

Note This symbol is used if your special

Reference This symbol refers to additional information
1 Footnote Footnotes are notes which refer to certain
abc
The signs for Danger and Warning are
used in this manual under the following con-
ditions:
damage to personnel if the instruction is
disregarded or not followed accurately.
damage to equipment or data if the
instruction is disregarded or not followed
accurately.
have to be observed during the handling of
components which may be damaged by
electrostatic discharges.
attention is drawn to a remark.
in other handbooks or sections.
points in the text. Footnotes consist of 2
parts:
Markings in the text and the footnote text.
The markings in the text are arranged as
continuous raised numbers.
The footnote text (in smaller typeface) is
placed at the bottom of the page and starts
with a number and a full stop.
5