ComAp IM-NT-BB Reference Manual page 295

15.2.1.13 Binary output: Horn
Related FW 3.0
The output closes together with the output Alarm. It opens when the output
Description
Alarm
elapsed.
15.2.1.14 Binary output: Alarm
Related 3.0
FW
Descriptio The output is closed if there is at least one unconfirmed alarm in the alarm list.
n
N :
OTE
Some alarm types as e.g. Off load, History record, Low power, Mains protection do not
require confirmation, they disappear from the alarm list automatically when the alarm
condition disappears. That means the Alarm output is not activated by alarms of these
types.
NT
InteliMains , SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
is opened or Horn reset button is pressed or Horn timeout has
295