ComAp IM-NT-BB Reference Manual page 201

12.2.14.14 Setpoint: AcallCH5-Type
Group Act. calls/SMS
Range [units] [-]
Related FW 3.0
Force value YES
possible
Description The setpoint is used to specify the alert type of the active calls - channel 5.
See the chapter
12.2.14.15 Setpoint: AcallCH5-Addr
Group Act. calls/SMS
Range [units] [-]
Related FW 3.0
Description The setpoint is used to specify the recipient address for the active calls -
channel 5. The content of the address must correspond to the selected alert
type (e.g. it must contain e-mail address if the alert type is e-mail). See the
chapter
12.2.14.16 Setpoint: NumberRings AA
Group Act. calls/SMS
Range [units] 1 .. 30 [-]
Related FW 3.0
Description This setpoint is used to adjust the number of rings after which the modem,
which is attached to he controller, answers the incoming call.
Number of rings prior to answering the modem connection from PC to
controller.
N :
OTE
Any change of this setpoint is applied first after next switching the controller
or modem off and on or after disconnecting the modem from the controller
and connecting it back.
NT
InteliMains , SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
Alarm messaging
Alarm messaging for more details.
for more details.
201