Led Matrix - Fujitsu IRF-1S series User Manual

LED Matrix

The RAID Controllers have control of the Drive Status and Drive Activity LEDs.
Drive LEDs
Drive Slot 1
Drive Slot 2
Drive Slot 3
These LEDs which are located on the front bezel present the information in the
form of different colors and states (steady and flashing), as well as corresponding
audible alarms. Refer to the table below for a description of the LED conditions and
their meaning:
Front Bezel LED & Audible Alarm Matrix
Condition
Power Up
Simplex Mode Controller Soft
Boot/Reset
Duplex Mode Single Controller
Reset
Empty Drive Slot
Drive Slot 4 Drive Slot 7 Drive Slot 10
Drive Slot 5 Drive Slot 8 Drive Slot 11
Drive Slot 6 Drive Slot 9 Drive Slot 12
Front Bezel LEDs
Drive Status LED
Steady Green for Blinking Green until
inserted drives. the controllers are
ready.
Steady Green for Steady Green.
inserted drives.
Steady Green for Steady Amber until
inserted drives. the controllers are
ready.
Off. N/A
Chapter 4 - Managing and Monitoring
Cooling Fan Status LED
Power Supply Status LED
Channel Status LED
Power On LED
Alarm Reset Button
(One-Touch Annunciation)
Channel Status LED Audible Alarm
Short Beep.
Short Beep.
Continuous Beep.
N/A
RESET ALARM
113
LED Matrix