Table of Contents
Advertisement
Chapter 4 - Managing and Monitoring
126
Updating the Controller Firmware
b
Use the Up and Down Arrow keys to select Reset Controller and press
<Enter>.
Diagnostics - Reset Controller Screen
c
Use the Up and Down Arrow keys to select a controller on which the
firmware was changed to reset it and press <Enter>.
d
Select Yes to reset the controller and press <Enter>. Wait while the
controller reset takes place.
The RAID Controller(s) will restart with the new firmware.
NOTE:
In duplex mode (dual controllers), the second controller's firmware
is automatically updated during the restart procedure.
Reset Controller Screen
Advertisement
Table of Contents
