Removing The Seat - KTM 250 XC-W 2018 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.20
12.21
12.22
76

Removing the seat

V00342-10
Mounting the seat
V00343-10
V00342-10
Removing the air filter box cover
V00346-10
–
Remove screws 1 .
–
Raise the rear of the seat, pull the seat back, and lift it off.
–
Hook in the front of the seat on the collar bushing of the fuel
tank, lower it at the rear and push it forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
Condition
The air filter box cover is secured.
–
1
Remove screw .
1 .
M6 10 Nm (7.4 lbf ft)