Lubricating The Steering Head Bearing - KTM 250 XC-W 2018 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.15
12.16
12.17
74

Lubricating the steering head bearing

H02387-01
Removing front fender
V00340-10
V00341-10
Installing front fender
V00341-11
(All standard EXC/XC-W models)
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
(All Six Days models)
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws 1 .
–
2
Remove screws . Take off front fender.
Main work
–
Position front fender. Mount and tighten screws
Guideline
Remaining screws,
chassis
( p. 67)
( p. 68)
( p. 68)
( p. 70)
p. 119)
1 .
M6 10 Nm (7.4 lbf ft)