Map Switch (All Six Days Models) - KTM 250 XC-W 2018 Owner's Manual

6.9 Turn signal switch (All EXC models)
6.10 Emergency OFF switch (EXC AU)
6.11 Electric starter button
6.12

Map switch (All Six Days models)

Turn signal switch
Possible states
Turn signal off – The turn signal switch is in the cen-
tral position.
Left turn signal, on – The turn signal switch is turned
to the left.
Right turn signal, on – The turn signal switch is
turned to the right.
E00820-12
The emergency OFF switch
handlebar.
Possible states
Ignition off – In this position, the ignition circuit
is interrupted, a running engine stops, and a
non-running engine will not start.
Ignition on – In this position, the ignition circuit is
closed, and the engine can be started.
E00823-10
The electric starter button
handlebar.
Possible states
• Electric starter button
• Electric starter button
tric starter is actuated.
E00824-10
1
The map switch
Possible states
Map switch in position I – The ignition timing map Perfor-
•
mance is active in this position.
Map switch in position II – The ignition timing map Soft is
•
active in this position.
Warning
Voiding of the government approval for road use and the
E00825-10
insurance coverage If the map switch is installed, the
vehicle's approval for road use is invalidated.
–
Only operate the vehicle in closed-off areas away from
public road traffic if the map switch is installed.
The engine characteristic can be altered with the map switch.
1 is fitted on the left side of the handlebar.
1
is fitted on the right side of the
1
is fitted on the right side of the
in basic position
pressed – In this position, the elec-
is fitted on the right side of the handlebar.
6 CONTROLS
19