Preparation; Ways Of Preparing A Beverage - Jura S8 Instructions For Use Manual

2 Preparation

Ways of preparing a
beverage
Basic information about preparing drinks:
U
During the grinding operation you can change the coffee
strength of single products. To do this, move your finger
across the display.
U
During preparation you can change the preset amounts (e.g.
amount of water or milk foam). To do this, move your finger
across the display.
U
You can stop preparation at any time. To do this, touch
'Cancel'.
Coffee tastes best served hot. A cold porcelain cup cools the bever-
age – and impairs the taste. We therefore recommend prewarming
the cups. The full coffee aroma can develop only in prewarmed cups.
You can purchase a JURA cup warmer from your specialised dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 'Permanent settings in programming mode –
Adjusting the product settings').
The S8/S80 offers various ways of preparing a speciality coffee, milk
or hot water.
Preparation using the start screen: Simply touch the desired prod-
uct. The following products are displayed as standard on the start
screen:
'Espresso' 'Coffee'
'Cappuccino' 'Latte macchiato'
Preparation using the product selector view: Only some of the
products you can prepare are shown on the start screen. As soon as
you touch the product selector symbol in the top right, more prod-
ucts are displayed in a product selector view.
2 Preparation
'2 x Coffee' 'Hot water'
'Flat White' 'Milk foam'
15