Connecting Milk - Jura S8 Instructions For Use Manual

Connecting milk

T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
'Filter operation'
'Filter is being
the fine foam frother.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
'System is filling'
'Empty drip tray'
T Empty the drip tray and put it back into the machine.
T Place a receptacle under the coffee spout.
'Machine is heating'
'Machine is rinsing', the system is rinsed. The rinse stops
automatically. The start screen is displayed. Your S8/S80 is
ready for use.
E If the filter is active, this is indicated by a blue filter symbol at
the top of the display.
Your S8/S80 creates fine, creamy, feather-light milk foam with a per-
fect consistency. The most important requirement for frothing milk
is a milk temperature of 4–8 °C. We would therefore recommend
using a milk cooler or a milk container.
T Remove the protective cover from the milk system.
T Connect the milk pipe to the milk system.
T Connect the other end of the milk pipe to a milk container
or a milk cooler.
1 Preparing and using for the first time
/ 'Saved'
rinsed', the filter is rinsed. Water flows out of
13