Jura S8 Instructions For Use Manual page 12

1 Preparing and using for the first time
12
Precondition: The bean container has been filled.
T Connect the mains cable to the machine.
T Insert the mains plug into a power socket.
T Press the On/Off button Q to switch the S8/S80 on.
'Sprachauswahl'
E To display more languages, move your finger either down-
wards or upwards in the selection list until the desired
language comes into focus (e.g. 'English').
T Touch 'Save'.
'Saved' appears briefly on the display to confirm the setting.
'Water hardness'
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 'Preparing and using for the first
time – Determining the water hardness').
T Move your finger across the display to change the water
hardness setting, e.g. to '25 °dH'.
T Touch 'Save'.
'Saved' appears briefly on the display.
'Insert filter'
T Place one receptacle under the coffee spout and another
under the fine foam frother.
T Remove the water tank and rinse it with cold water.
T Fit the filter cartridge extension supplied on top of the
CLARIS filter cartridge Smart.
T Insert the filter cartridge with its extension into the water
tank.
T Turn the filter cartridge clockwise until it audibly clicks into
place.
/ 'Deutsch'