Preparation; Ways Of Preparing A Beverage - Jura 751 Instructions For Use Manual

2 Preparation

Ways of preparing a
beverage
Basic information about preparing drinks:
U
During the grinding operation you can select the coffee
strength of single products by turning the Rotary Switch.
U
During preparation, you can change the preset amounts (e.g.
amount of water or milk foam) by turning the Rotary Switch.
U
You can stop preparation at any time. To do this, press the
'  ' button.
U
You can personalise all products that are stored as standard in
your Z6 with a new product name and individual settings (e.g.
amount and coffee strength) (see Chapter 4 'Permanent
settings in programming mode – Adjusting the product
settings'). Please note that the descriptions provided in the
following sections always refer to the default settings.
U
The star on the display indicates that the 'Smart mode' is
activated. This means that, after some time, the products on
the start screen will be rearranged according to your personal
preferences.
Coffee tastes best served hot. A cold porcelain cup cools the bever-
age – and impairs the taste. We therefore recommend prewarming
the cups. The full coffee aroma can develop only in prewarmed cups.
You can purchase a JURA cup warmer from your specialised dealer.
The Z6 offers various ways of preparing a speciality coffee, milk or
hot water.
Preparation using the start screen: Simply press the correspond-
ing preparation button for the product shown on the display (start
screen) that you want. The following products are displayed as
standard:
'Espresso'
'Coffee'
'Caffè Barista'
'Hot water'
'Macchiato'
'Flat White'
'Cappuccino'
'Latte macchiato'
2 Preparation
15