Maintenance; Rinsing The Machine; Automatic Milk System Rinsing - Jura S8 Instructions For Use Manual

5 Maintenance

5 Maintenance

Rinsing the machine

Automatic milk system
rinsing
32
Your S8/S80 has the following integrated maintenance programmes:
U
Rinsing the machine ('Rinse')
U
Cleaning the milk system
U
Changing the filter
U
Cleaning the machine ('Clean')
U
Descaling the machine ('Descale')
E Clean the machine, descale the machine or change the filter
when you are prompted to do so.
E Touch ' P ' to view the list of maintenance programmes
tenance status'). When the bar is completely filled with red,
your S8/S80 will prompt you to perform the appropriate main-
tenance programme.
E In the interests of hygiene, you should clean the milk system
daily when you have been preparing milk.
You can initiate the rinse operation manually at any time.
Precondition: The start screen is displayed.
T Place one receptacle under the coffee spout and another
under the fine foam frother.
T Touch ' P '.
'Machine settings'
T Move your finger across the display until
tus' is displayed in the centre.
T Touch 'Maintenance
'Clean'
T Move your finger across the display until
in the centre.
T Touch
'Rinse'
'Machine is rinsing'
'Milk system is being rinsed'
The rinse stops automatically. The start screen is displayed.
15 minutes after milk preparation, the milk system is automatically
rinsed. Therefore always place a receptacle under the milk system
after preparing milk.
('Clean the milk
('Change filter') (only if filter is fitted)
status'.
to start the rinse operation.
system')
('Main-
'Maintenance sta-
'Rinse' is displayed