4 Permanent settings in programming mode
Product
Coffee
strength
Milk foam,
milk
Hot water,
hot water for
green tea
Automatic switch-off
26
Amount
–
Milk: 1 sec. – 120 sec.
–
Water: 25 ml – 450 ml
Permanent settings in programming mode always follow the same
model.
Example: Proceed as follows to change the coffee strength for one
espresso.
Precondition: The start screen is displayed.
T Touch
settings is displayed.
T Touch
'Espresso'
T Move your finger across the display until
displayed in the centre.
T Now move your finger to the left or right to change the set-
ting for the coffee strength.
T Touch 'Save'.
'Saved'
T Touch
screen again.
By instructing your S8/S80 to automatically switch itself off, you can
cut down your energy consumption. If this function is activated,
your S8/S80 switches off automatically after the preset time follow-
ing the last action on the machine.
You can set the automatic switch-off to 15 minutes, 30 minutes or
1–9 hours.
Precondition: The start screen is displayed.
T Touch ' P '.
'Machine settings'
T Touch
'Switch off after'
More settings
Product name, delete/replace/copy
product
Temperature (low, normal, high),
product name, delete/replace/copy
product
'Espresso'
for about 2 seconds until the list of possible
'Product
settings'.
appears briefly on the display.
'Back'
the number of times needed to display the start
'Machine
settings'.
'Coffee strength'
is