Product Settings - Jura S8 Instructions For Use Manual

Product settings

Adjusting the product
Product Coffee
strength
Ristretto, 10 levels
espresso
Coffee 10 levels
Two ristretti,
two espressi,
two coffees
Cappuccino, 10 levels
flat white,
caffè latte
Latte macchiato 10 levels
Espresso 10 levels
macchiato
Touch a product on the start screen for about 2 seconds to view the
list of setting options:
U
'Product
strength, amount of water, etc.
U
'Product
U
'Delete': Remove a product from the start screen.
U
'Replace
with your favourites.
U
'Copy
a variant with a new product name and individual settings.
U
'Double product'
Create a double product of the desired speciality.
E You can only change the settings of products that are stored
on the start screen.
The following settings can be set permanently for all speciality
settings
coffees, milk and hot water:
Amount
Coffee: 15 ml – 80 ml
Coffee: 25 ml – 240 ml
– Coffee: the amount set
for the single product is
doubled.
Coffee: 25 ml – 240 ml
Milk: 1 sec. – 120 sec.
Coffee: 25 ml – 240 ml
Milk: 1 sec. – 120 sec.
Interval: 0 sec. – 60 sec.
Coffee: 15 ml – 80 ml
Milk: 1 sec. – 120 sec.
4 Permanent settings in programming mode
settings': Specify individual settings such as coffee
name': Change the name of the product.
product': Replace the products on the start screen
product': Duplicate any product, for example to create
(not for products with milk or hot water):
More settings
Temperature (low, normal, high),
product name, delete/replace/copy/
double product
Temperature (low, normal, high),
product name, delete/replace/copy/
double product
Temperature (as for single product),
product name, delete product
Temperature (low, normal, high),
product name, delete/replace/copy
product
Temperature (low, normal, high),
product name, delete/replace/copy
product
Temperature (low, normal, high),
product name, delete/replace/copy
product
25