Cleaning The Milk System - Jura S8 Instructions For Use Manual

Cleaning the milk system

CAUTION
To ensure that the milk system always works properly, you must
clean it daily when you have been preparing milk.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E JURA milk system cleaner is available from specialised dealers.
E To clean the milk system, use the container supplied.
Precondition: The start screen is displayed.
is displayed.
T Touch 'Clean the milk
T Touch 'Clean the milk system'
T Touch 'Start'.
T Touch 'Start' again.
'Milk system cleaner'
T Remove the milk pipe from the milk container or milk cooler.
T Add milk system cleaner to the front part of the container
up to the bottom mark (indicated by 6).
T Then fill with water up to the upper mark.
T Place the container under the fine foam frother.
T Connect the milk pipe to the container.
E To connect the milk pipe to the container correctly, the pipe
must be fitted with a connector.
T Touch 'Next'.
'Milk system is being cleaned'
The operation is interrupted,
T Rinse the container thoroughly and fill the front part with
fresh water up to the upper mark.
T Place this under the fine foam frother and reconnect the
milk pipe to the container.
T Touch 'Next'.
'Milk system is being cleaned'
The operation stops automatically.
'Clean the milk system'
system'.
again.
/ 'Connect the milk tube'
'Fresh water'.
5 Maintenance
/ 'Fresh water'
33