Table of Contents
Advertisement
the Aquadur® test strip and the description
on the packaging.
The water hardness can now be set.
Connecting milk
Your JURA creates fine, creamy, feather-light milk
foam with a perfect consistency. The most
important requirement for frothing milk is a milk
temperature of 4–8 °C. We would therefore
recommend using a milk cooler or a vacuum milk
container.
T Remove the protective cover of the dual
spout.
T Connect the milk pipe to the dual spout.
T Connect the other end of the milk pipe to a
milk container or immerse it in a milk
carton.
E Ensure that the filling height of the milk is
no higher than the milk pipe connection on
the dual spout.
2 Preparation
E You can interrupt preparation at any time
while a speciality coffee, speciality coffee
with milk or hot water is being prepared. Just
press any button.
E Before and during the grinding operation
you can change the coffee strength of
espresso <, coffee >, cappuccino / and
latte macchiato ( by turning the Rotary
Switch.
E During preparation, you can change the
preset amounts (e.g. amount of milk foam
or water) by turning the Rotary Switch.
E You can follow the current status of
preparation on the progress bar.
Coffee tastes best served hot. A cold porcelain cup
cools the beverage – and impairs the taste. We
therefore recommend prewarming the cups. The
full coffee aroma can develop only in prewarmed
cups. You can purchase a JURA cup warmer from
your specialised dealer.
You can make permanent settings for all products
in programming mode (see Chapter 4 'Permanent
settings in programming mode – Products').
Espresso, coffee
Preparation of espresso < and coffee > follows
this model.
Example: Proceed as follows to prepare one coffee.
Precondition:
READY
T Place a cup under the dual spout.
> T Press the Coffee button to start preparation.
COFFEE
, the preset amount of water flows
into the cup.
Preparation stops automatically.
READY
2 Preparation
is displayed.
de
en
fr
it
nl
es
pt
ru
41
Advertisement
Table of Contents
