Miele PG 8504 Operating Instructions Manual page 57

Laboratory glassware washer
Table of Contents

Advertisement

Setting the start
time
Activating delay
start
Deactivating delay
start
Select a program.
Press the OK button before starting the program.
Use the arrow buttons  (higher) and  (lower) to set the hours and
confirm your selection with the OK button.
Each press of the OK button takes the highlighting to the next input
position automatically. You cannot go back to the previous entry. If a
mistake is made, the process must be canceled using the  button
and repeated.
Set the minutes using the arrow buttons  (higher) and  (lower)
and save your entry with OK.
The start time is now saved and can be changed as described at any
time up to activation of delay start.
Delay start is activated with the Start/Stop button.
The selected program with the set start time set is then shown on the
display. If the Auto-Off function has been activated (see "Further
settings/Switch off after"), the machine will switch itself off after the
set time until the program start time set is reached.
Press the  button or switch the machine off using the  button.
Start time
Normal
Temperature
60 °C
Switch on at
12:30
Operation
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents