LEDs in the buttons
The buttons on the control panel have LEDs (Light Emitting Diodes).
These indicate the status of the machine.
Button
LED
Button
ON
FLASHES
OFF
Program
ON
selection
buttons
,
and
OFF
Button
ON
OFF
Button
ON
Start/Stop
FLASHES
GREEN
FLASHES
RED
OFF
Guide to the machine
Status
The machine is switched on.
The machine is ready for use.
The machine is switched off.
The respective program has been
selected. At the end of the program the
LED will remain lit until a different
program is selected.
The program is not selected or the
program settings are being changed.
A program has been selected from the
program list with this button. At the end
of the program the LED will remain lit
until a different program is selected.
No program has been selected from the
list with this button or the program
settings are being selected.
A program is running.
A program has been selected, but not
yet started.
A fault has occurred (see "Problem
solving guide").
A program has finished.
11