Factory Default - Miele PG 8504 Operating Instructions Manual

All settings

Factory default

All parameters which have been altered can be reset to their default
settings. Control parameters and program settings are reset
separately.
Additional settings
Open the

the  button and then switch it on again with the  button whilst
keeping the  button pressed in.
Open the menu as follows:

Additional settings

 Factory default
Reset

No
–
Altered parameters are maintained.
Program settings only
–
All program settings are reset.
Programs saved on free memory locations remain unchanged.
– All settings
All control parameters including dispensing quantities and water
hardness will be reset.
Select an option using the  and  arrow buttons.

Confirm your selection with OK.

The machine is restarted.
All settings
When is selected and the machine is restarted, you will be
prompted to re-enter basic parameters such as the language, date,
time, water hardness, etc.
Enter the language, date, time, and so on.

When the last entry is made, all the parameters are saved and the
factory default settings have been reset. The display changes and
shows the last selected program.
menu by switching the machine off with
Reset
No
Program settings only
Additional settings
93