Increased water
level
Interim rinse
Increasing the water level is advisable if a large amount of water
clings to items due to the structure of the wash load, if items are
heavily soiled or if a heavy build-up of foam might occur due to the
type of soiling (e.g. blood) and the process chemicals used. The
additional amount of water required depends on the type of basket or
wash cart used, the type of soiling and the load.
...
Water volume change
The water quantity can be increased in 0.5 l increments. The possible
range is shown in the bottom line.
Use the arrow buttons (higher) and (lower) to alter the water
quantity.
Press OK to save the setting.
Some programs can have the option of adding an extra interim rinse
(see "Program chart").
...
Rinse
–
No
The additional interim rinse block is deactivated.
Yes
–
The additional interim rinse block is activated for all applicable
programs.
Select an option using the and arrow buttons.
Press OK to save the setting.
Increased water level
0,0
l
(0,0 - 1,5 l )
Rinse
No
Yes
Additional settings
81