Operation; Selecting A Program; Starting A Program; Starting A Program Using Delay Start - Miele PG 8504 Operating Instructions Manual

Operation

... using the
program selector
buttons
... from the
program list
Starting a
program using
delay start
56

Selecting a program

Select a program using program selection buttons ,  or

.
Press the  button and

use the  and  arrow buttons to highlight a program and confirm

your selection with OK.
The LED in the button selected will light up and the relevant program
will appear in the display. The LED in the Start/Stop button also starts
to flash.
Another program can be selected at any time before a program has
started. Once it has started, program selection is locked.
Always select the program depending on the type of load and degree
and type of soiling, or on infection prevention issues.
The programs and their areas of application are described in the
Program overview at the end of these operating instructions.

Starting a program

Close the door.

Press the Start/Stop button.

The LED in the button will light up constantly.
The start of a program can be delayed; for example, to benefit from
economy rates of electricity or to clean the wash chamber before it is
used the next day. Starting from the programmed time, a delay start
time between 1 minute and 24 hours can be selected in one minute
increments (see "Settings/Time of day").
Delay start must be switched on in the Settings menu (see "Settings
/Delay start").
If soiling is left to dry on the load for longer, the processing result
can be adversely affected. There is also a risk of corrosion for
stainless steel items.
Normal
Temperature
60 °C
Duration
20 Min