Additional settings
88
Program release
It is possible to block access to individual programs. Blocked
programs are not available for selection, so for example it can be
ensured that only validated programs are used.
Additional settings
Open the
the button and then switch it on again with the button whilst
keeping the button pressed in.
Open the menu as follows:
Additional settings
Release program
All
–
All programs are released for use.
Selection
–
A selection of programs are available for use.
Select an option using the and arrow buttons and confirm your
selection with OK.
Selection
The
option displays a list of all programs.
Programs are selected by multiple choice. A box is shown next to
all programs in the list. If a program is released, there is a tick in
the box. An empty box indicates a blocked program.
Programs can be released or blocked using the arrow buttons
and and by confirming with OK.
To save the selection, select the
and confirm with OK.
Water hardness
You can use this menu to set the water softener to the water
hardness of the mains supply.
For more information see "Water softener".
menu by switching the machine off with
Release program
All
Selection
Release program
Accept
Normal
Accept
option at the end of the list