Operating Conditions; Storage And Transport Conditions; Commissioning And Operation Of The Mighty Medic Vaporizer; Unpacking - Vapormed MIGHTY MEDIC Instructions For Use Manual

4. IMPORTANT REMARKS

Operating Conditions

Ambient conditions in which the
specified aerosol characteristics are
guaranteed:
+35°C
+5°C
Ambient temperature:
+5°C to +35°C (+41°F to +95°F)
15% - 90%
Relative humidity of ambient air:
15% to 90%
Atmospheric pressure:
700 hPa to 1060 hPa
The device features interference sup-
pression acc. to EN 60601-1-2 (see
Chapter 10.5. "Information on Electro-
magnetic Compatibility", page 40).
Radiofrequency emitting equipment
(e.g. mobile phones) should not be
used in the immediate vicinity of the
device. In case of doubt, contact qual-
ified personnel.

Storage and Transport Conditions

+60°C
-20°C
Ambient temperature:
-20°C to +60°C (-4°F to +140°F)
15% - 90%
Relative humidity:
15% to 90%
Atmospheric pressure:
700 hPa to 1060 hPa
Do not store any parts of the MIGHTY
MEDIC Vaporizer in wet rooms (e.g.
bathroom) or transport near damp
objects.
Extreme fluctuations in ambient tem-
perature can lead to condensation
and damage the device's function.
16
5. COMMISSIONING AND OPER ATION OF THE
M IGHTY M EDIC VAPORIZER

5.1. Unpacking

The box contains all components as
well as the Instructions for Use. Keep
the Instructions for Use for future ref-
erence.
Remove the MIGHTY MEDIC Vapor-
izer and the accessories from the box.
Immediately after unpacking, check
whether the Vaporizer, the accesso-
ries, the power adapter and its device
plug are all included in the delivery
and work properly.
If you notice any defects, inform the
seller or the delivery agent immedi-
ately.
The packing material (plastic
bags, boxes etc.) must be
kept out of the reach of chil-
dren as it is a potential source of dan-
ger.
Please dispose of the packing mate-
rial in a proper and environmentally
friendly manner.
We recommend keeping the original
packaging in case it is required later
(transport, Service Centre, etc.).

5.2. Power Connection

Before connecting up the MIGHTY
MEDIC Vaporizer, make sure that the
information given on the power adapt-
er type label corresponds to the local
power supply voltage.
All parts of the electrical system must
comply with currently applicable offi-
cial regulations.
Place the heated Vaporizer only on a
hard, stable surface, and not on any
soft or heat-sensitive material.
Take care that the power adapter cord
cannot be damaged through kinking,
crushing or pulling.
Improper installation
lead to personal injury or ma-
terial damages, for which the
manufacturer cannot be held respon-
sible.
17
may