Explanation Of Symbols, Safety Recommendations - Vapormed MIGHTY MEDIC Instructions For Use Manual

2. EXPLANATION OF SYMBOLS, SAFETY RECOMMENDATIONS

Please read the following
safety recommendations
thoroughly and carefully
before using the device.
These Instructions for Use are
a significant part of the MIGHTY
MEDIC Vaporizer and must be pro-
vided to the user.
These instructions given in this In-
structions for Use must be strictly
observed as they are extremely
Explanation of Symbols
Please follow these instructions carefully!
(according to IEC 60601: 2005)
Warning !
In order to avoid injuries to persons and damage to the equipment,
it is mandatory to observe instructions marked with this symbol.
Note/Tip!
This symbol always gives you technical information or useful tips
regarding the MIGHTY MEDIC Vaporizer.
Symbol for serial number - followed by the serial number of the
SN
medical product
Symbol for the manufacturer - the manufacturer's name and ad-
dress are next to the symbol
The medical product was introduced after 13 August 2005. The
product may not be disposed of in normal household waste. The X
on the trash can indicates the necessity of disposing of this product
separately.
The device contains a built-in rechargeable lithium-ion battery that
must be discharged before disposal.
important to ensure safety during
installation, use and maintenance
of the MIGHTY MEDIC Vaporizer.
Please keep this brochure in a safe
place for future reference.
You may download the current
Instructions for Use for
MIGHTY MEDIC Vaporizer
www.vapormed.com.
8
2. EXPLANATION OF SYMBOLS, SAFETY RECOMMENDATIONS
The MIGHTY MEDIC Vaporizer is protected by an angle of 15°
22
IP
against dropping water (IP 22). The device should nevertheless be
protected against moisture and rain. Do not use in the bathroom or
above water.
EU conformity symbol: A 4-digit number after the CE marking
0123
indicates that a notified body is involved in the conformity
assessment procedure.
the
on
Symbol for order number - followed by the order number of the
REF
corresponding medical product (or part)
Safety tested and production monitored by TUEV SUED according
to IEC 60601-1, CAN/CSA C22.2 No. 60601-1 and ANSI/AAMIES
60601-1.
Caution! Hot surfaces!
Do not touch metal parts!
Keep away from sunlight
Protect against moisture and humidity
DC (direct current)
Interference may occur in the vicinity of equipment marked with
the following symbol.
Temperature limits of ambient temperature
Humidity limitation
9