Table of Contents
Advertisement
10. THE M IGHTY M EDIC VAPORIZER
Before maintenance, the device has
to be switched off and disconnected
from the poser adapter. To do so, pull
the plug of the power adapter from the
MIGHTY MEDIC Vaporizer.
The power adapter must be pulled out
the from the socket.
10.1. Cleaning of the MIGHTY
MEDIC Vaporizer and the
Power Adapter
For home use it is sufficient to clean
the housing of the MIGHTY MEDIC
Vaporizer and the power adapter with
a damp cloth. Do not hold the device
under running water.
In a physician's office or clinic, the
housing of the MIGHTY MEDIC Va-
porizer and power adapter can be
cleaned and disinfected with a sur-
face disinfectant.
The surface disinfectant should be
certified (e.g. VAH/DGHM or FDA
approval or CE marking), be suitable
for disinfecting the MIGHTY MEDIC
Vaporizer and power adpater, and
compatible with the Vaporizer and the
power adapter (see Chapter "Material
Resistance of the MIGHTY MEDIC
Vaporizer", page 29).
Use only a soft clean cloth for wiping.
The cloth may be damp, but not wet.
Prevent liquid from entering the
MIGHTY MEDIC Vaporizer and the
power adapter, as this can lead to
damages on the electric parts and
eventually to malfunctions.
If any liquid does get into the Vapor-
izer or the power adapter, contact our
Service Center immediately.
10.2. Care and Maintenance, Stor-
age, Disposal
Before any maintenance work is done,
the MIGHTY MEDIC Vaporizer has to
be switched off and the power adapter
unplugged from the power supply.
Storage
Store the MIGHTY MEDIC Vaporizer
in a dry place protected against the ef-
fects of weather and out of the reach
of children or unqualified persons.
In Case of Problems
If the power adapter has been in use,
unplug it at the socket and ensure
that no one can connect the MIGHTY
MEDIC Vaporizer to the mains supply
again without this being noticed.
Put the MIGHTY MEDIC Vaporizer in
the original packaging, or pack it prop-
erly in other packing material, and
send it to our Service Center.
Disposal
If the MIGHTY MEDIC Vaporizer or
the power adapter is irreparably dam-
aged, please do not simply throw
them away. As they are made of high
quality, completely recyclable com-
ponent parts, they should be brought
36
10. THE M IGHTY M EDIC VAPORIZER
to a material recycling center in your
town or sent to our Service Center for
disposal.
10.3. Troubleshooting, Periodic
Safety Checks
If the device does not function prop-
erly when the power adapter is con-
nected to the power socket, please
check the MIGHTY MEDIC Vaporizer
using the tips in the following table:
Problem
Possible Cause / Remedy
MIGHTY MEDIC cannot be
Please ensure that the MIGHTY MEDIC's battery is
switched on.
charged or the Vaporizer is connected via the power
adapter to a functioning mains socket.
If the Vaporizer still does not work, then the device is
faulty. In this case, disconnect from the mains without
delay and get in touch immediately with our Service
Center.
The display of the MIGHTY
Battery temperature is too high. Allow the Vaporizer to
MEDIC shows: ERR 001.
cool down.
The display of the MIGHTY
Battery temperature is too low. Warm up the Vaporizer.
MEDIC shows: ERR 002.
The display of the MIGHTY
The power adapter is not suitable. Please use an original
MEDIC shows: ERR 003.
Storz & Bickel power adapter.
The display of the MIGHTY
The Vaporizer is faulty. In this case, disconnect from the
MEDIC shows: ERR 004.
mains without delay and get in touch immediately with
our Service Center.
37
Hide quick links:
Advertisement
Table of Contents
