Table of Contents
Advertisement
10. THE M IGHTY M EDIC VAPORIZER
If the preceding tips do not
yield the desired results, or for
any other defects or problems
not mentioned here, please unplug
the power adapter and contact our
Service Center immediately.
Do not open the MIGHTY
MEDIC Vaporizer or the pow-
er adapter! Without special
tools and specialized knowledge, any
attempt to open either of these devic-
es will cause damage to them. Such
an attempt will invalidate the warranty
claim.
Do not try to remedy the defect your-
self. Contact our Service Center di-
rectly.
Periodic Safety Checks
The following safety checks should be
performed at least every 24 months by
a qualified person who has adequate
training, knowledge, and practical ex-
perience to perform these tests.
Inspect the device and accessories
for mechanical and functional dam-
age.
Inspect the safety labels for leg-
ibility.
Verify that the device functions
properly as described in the
Instructions for Use.
The safety check is to be recorded in
a device log and data of control results
are to be documented.
If the device is not functioning prop-
erly or fails any of the above tests, the
device has to be repaired.
38
10. THE M IGHTY M EDIC VAPORIZER
10.4. Technical Specifications
Power adapter:
Manufacturer:
Mean Well (types: GSM36E12-P1J resp. GSM36U12-P1J)
Manufacturer:
EDAC (type: EM1024PR)
Power consumption: 36 W
Supply voltage:
100-240 V / 50-60 Hz
Output voltage:
12 V DC
MIGHTY MEDIC Vaporizer:
Supply voltage:
12 V DC
Power consumption: 36 W
Operating
temperature:
5°C - 35°C / 41°F - 95°F
Vaporization temperature:
adjustable between approx. 40°C - 210°C / 104°F - 410°F
Size: 14 x 8 x 3 cm (5.5 x 3.2 x 1.2 inch)
Weight: approx. 235 g (0.5 lbs)
Please unplug the power adapter from the mains socket to completely disconnect
from the mains power supply.
Subject to technical changes.
Patents and designs: www.vapormed.com/patents
Batteries are specially assembled consumable items that can only be
replaced by our Service Center when the MIGHTY MEDIC Vaporizer is
sent in to them.
Any attempt by the customer to replace the battery by him/herself is potentially
dangerous and leads to loss of any claims under the warranty and exempts Storz
& Bickel from any liability.
Manufacturer
Storz & Bickel GmbH & Co. KG
In Grubenäcker 5-9
78532 Tuttlingen, Germany
39
Hide quick links:
Advertisement
Table of Contents
