Calibration Menu; White Color Presets; Rgb To White - SHOWTEC 43560 Manual

Spectral M300 Q4 MKII

8. Calibration menu

With this menu you can adjust the temperature of the white color presets and adjust the RGB to White
color.
01) While in main menu, press the
02) Press the ENTER button to set the password.
03) Insert the password: UP>DOWN>UP>DOWN and press the ENTER button to confirm.
04) Press the UP/DOWN buttons to toggle between the menus described below.

8.1. White color presets

With this menu you can adjust the temperature of the built-in white color presets.
01) Press the UP/DOWN buttons
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 11 white color presets:
04) If you choose
05) Once you have chosen the desired preset, press the ENTER button to open the submenu.
06) Press the UP/DOWN buttons to toggle between RED, GREEN, BLUE and WHITE.
07) Press the ENTER button to open the desired color's brightness settings.
08) Press the UP/DOWN buttons to increase/decrease the color brightness. The adjustment range of
each color is between 0-255, from dark to brightest.
09) If you choose

8.2. RGB to White

With this menu you can adjust the temperature of the white color.
01) Press the UP/DOWN buttons
02) Press the ENTER button to open the menu.
03) Now you can adjust the intensity of the RGB colors. Press the UP/DOWN buttons to toggle between
RED, GREEN and BLUE.
04) If you choose
05) Once you have chosen the desired color press the ENTER button to open the desired color's
brightness settings.
06) Press the UP/DOWN buttons to increase/decrease the color brightness. The adjustment range of
each color is between 0-255, from dark to brightest.
Ordercode: 43560
UP/DOWN buttons
until the display shows
, you will return to the previous step.
, you will return to the 11 presets.
until the display shows
, you will return to the previous step.
until the display shows
.
.
19
.
- .