Table of Contents
Advertisement
Spectral M300 Q4 MKII
Main Menu Options
Manual Mode
Auto programs
DMX/Slave mode
DMX address
DMX configuration
Settings
Key lock
Calibration menu
1. Manual Mode
With this menu you can set the static colors.
01)
While in main menu, press the UP/DOWN buttons until the display shows
02)
Press the ENTER button to open the menu.
03)
Press the UP/DOWN buttons to toggle between the static colors (Red, Green, Blue and White) and
strobe.
04)
Once you have chosen the desired color with the UP/DOWN buttons , press the ENTER button to
adjust the color intensity. The adjustment range is between 0-255, from dark to brightest. You can set
this with the UP/DOWN buttons.
05) Once you have chosen the strobe, the display will show
06) Press the
ENTER button to open the submenu.
07) Press the UP/DOWN buttons to increase/decrease the strobe frequency. The adjustment range is
between 0-20, from OFF to high strobe frequency.
08)
You can combine RED, GREEN, BLUE and WHITE to create an infinite range of colors (0-255).
09)
If you choose
Ordercode: 43560
, you will return to the main menu.
.
15
.
Advertisement
Table of Contents
