Your shipment includes: Showtec Spectral M300 Q4 MKII with 0,45m 3 pin combined XLR IN/OUT and 0,5m special power cable ...
Page 4
• If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net or safety cable. • When rigging, derigging or servicing the Spectral, always make sure, that the area below the installation site is secured and that there are not any unauthorized people around. Ordercode: 43560...
UK Cable US Cable BROWN YELLOW/COPPER PHASE BLUE BLACK SILVER NEUTRAL YELLOW/GREEN GREEN GREEN PROTECTIVE GROUND Make sure that the device is always properly connected to the earth! Improper installation can cause serious injuries and/or damage of property! Ordercode: 43560...
After this period complaints will not be handled anymore. Complaints will only then be considered if the client has so far complied with all parts of the agreement, regardless of the agreement from which the obligation is resulting. Ordercode: 43560...
Connections: Special power cable, special combined cable 3-pin XLR IN & OUT Dimensions: 170 x 130 x 180 mm (LxWxH) (incl. bracket) Weight: 1,0 kg Overview Fig. 01 01) 1x 4-in-1 Osram RGBW 02) Adjustment screw 03) Double mounting bracket Ordercode: 43560...
Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa. Connect the device to the main power supply. Ordercode: 43560...
15 and 16 (Auto run, Manual Mode). This means you can set your desired operation mode on the master device and all slave devices will react the same as the master device. Multiple Spectrals (Master/Slave control) Fig. 03 Ordercode: 43560...
Do not supply power before the whole system is set up and connected properly. Multiple Spectrals DMX Set Up Fig. 04 Note : Link all cables before connecting electric power Ordercode: 43560...
FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m). • DAP Audio DMX adapter: 3-pin/5-pin. Ordercode FLA30. The Spectral M300 Q4 MKII can be operated with a controller in DMX mode or without the controller in stand-alone mode. Ordercode: 43560...
When no button is pressed for 35 seconds, the display will turn off. To light up the display, you have to press the ENTER, UP or DOWN button. Once you have pressed the button, the display will light up. Ordercode: 43560...
07) Press the UP/DOWN buttons to increase/decrease the strobe frequency. The adjustment range is between 0-20, from OFF to high strobe frequency. You can combine RED, GREEN, BLUE and WHITE to create an infinite range of colors (0-255). If you choose , you will return to the main menu. Ordercode: 43560...
01) While in main menu, press the UP/DOWN buttons until the display shows 02) Press the ENTER button to open the menu. 03) Press the UP/DOWN buttons to choose the desired DMX address. There are 512 available DMX addresses to choose from Ordercode: 43560...
01) Press the UP/DOWN buttons until the display shows 02) Press the ENTER button to open the menu. 03) Insert the password: UP>DOWN>UP>DOWN and press the ENTER button to confirm. 04) The display will show and YES and the custom programs will have been reset. Ordercode: 43560...
05) It will now take 30 seconds for the device to become locked. 06) In order to unlock the device, press the buttons in the following order: UP>DOWN>UP>DOWN and press the ENTER button to confirm. 07) The display will show PASS and the device is unlocked. Ordercode: 43560...
05) Once you have chosen the desired color press the ENTER button to open the desired color’s brightness settings. 06) Press the UP/DOWN buttons to increase/decrease the color brightness. The adjustment range of each color is between 0-255, from dark to brightest. Ordercode: 43560...
White 10: 8500K 251-255 White 11: 10000K Channel 7 – Linear Strobe (CH1 and CH2, CH3, CH4 or CH5 must be set between 001-255 and CH6 between 11-255 No function 10-255 Strobe flash frequency, from slow to fast (0-20Hz) Ordercode: 43560...
Channel 2 – Green Dimmer intensity 0-255 Gradual adjustment Green from 0 – 100% Channel 3 – Blue Dimmer intensity 0-255 Gradual adjustment Blue from 0 – 100% Channel 4 – White dimmer intensity 0-255 Gradual adjustment White from 0-100% Ordercode: 43560...
Channel 1 – Hue (color variations) (CH3 must be set between 001-255 0-255 Gradual adjustment hue, from 0-100% Channel 2 – Red color saturation (CH3 must be set between 001-255 0-255 Saturation adjustment, from 0-100% Channel 3 – Value (dimmer) 0-255 Gradual adjustment dimmer, from dark to brightest Ordercode: 43560...
01) Power supply. Check that the unit is plugged into an appropriate power supply. 02) The LED. Return the Spectral to your Showtec dealer. 03) The internal fuse. Return the Spectral to your Showtec dealer. 04) If all of the above appears to be O.K., plug the unit in again.
Page 25
Turn up the air conditioning • Disconnect the fixture and return it LED damaged to your dealer The power supply settings do not • Disconnect fixture. Check settings match local AC voltage and and correct if necessary frequency Ordercode: 43560...