Related Manuals for SHOWTEC Vintage Blaze 33 Value Line V2
Summary of Contents for SHOWTEC Vintage Blaze 33 Value Line V2
- Page 1 MANUAL ENGLISH Vintage Blaze ’33 Value Line V2 Ordercode: 43324 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
Vintage Blaze ’33 Value Line Table of contents Warning ....................................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Rigging .................................... 4 Connection with the mains ............................5 Return Procedure ................................6 Claims ....................................6 Description of the device ..............................7 Optional accessories .............................. -
Page 3: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: ● Showtec Vintage Blaze ’33 Value Line ● Powercon Power cable (1,4 m) ●... - Page 4 ● If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
-
Page 5: Operating Determinations
Vintage Blaze ’33 Value Line ● The user is responsible for correct positioning and operating of the Vintage Blaze ’33 Value Line. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device. ●... -
Page 6: Connection With The Mains
Vintage Blaze ’33 Value Line The Vintage Blaze ‘33 Value Line can be mounted to any kind of truss with a clamp. Improper installation can cause serious injuries and/or damage of property! Connection with the mains Connect the device to the mains with the power-plug. Always check if the right color cable is connected to the right place. -
Page 7: Return Procedure
Vintage Blaze ’33 Value Line Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.com and request an RMA prior to shipping the... -
Page 8: Description Of The Device
Vintage Blaze ’33 Value Line Description of the device Features The Vintage Blaze ‘33 Value Line is a retro floodlight with high output and great effects. ● Retro design ● Input voltage: 240V AC, 50/60Hz ● Power consumption: 680W ● DMX channels: 1, 2, 4 or 11 channels ●... -
Page 9: Backside
Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. Installing the Lamp The Showtec Vintage Blaze ‘33 Value Line uses the GY9.5 lamp (ordercode 80703O or 80703G) as manufactured by all popular manufacturers. Use only the appropriate lamp for your unit. - Page 10 Vintage Blaze ’33 Value Line Procedure: 01) Disconnect the Vintage from power before installing the lamp. 02) Remove the 4 screws at the top of the fixture (Fig.03). 03) Carefully disconnect the LED strip from the 2 connectors at the side of the lamp grill (Fig.04). 04) Remove the lamp grill (Fig.05).
- Page 11 Vintage Blaze ’33 Value Line Fig. 05 Fig. 06 Fig. 07 Fig. 08 Fig. 09 Ordercode: 43324...
- Page 12 Vintage Blaze ’33 Value Line Fig. 10 Fig. 11 Fig. 12 Ordercode: 43324...
-
Page 13: Set Up And Operation
Vintage Blaze ’33 Value Line Set Up and Operation Follow the directions below, as they pertain to your preferred operation mode. Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa. Connect the device to the main power supply. -
Page 14: Fixture Linking
Vintage Blaze ’33 Value Line Multiple Vintages DMX Set Up Fig. 13 Note: Link all cables before connecting electric power Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows of two or more fixtures set to a master/slave operating mode. -
Page 15: Control Panel
Vintage Blaze ’33 Value Line Control Panel A) LCD display Menu button C) Up button D) Down button Fig. 14 Control Mode The fixtures are individually addressed on a data-link and connected to the controller. The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it, the controller will display the saved DMX address, next time.) DMX Addressing The control panel on the back side of the device allows you to assign DMX fixture addresses, which is the... -
Page 16: Menu Overview
Vintage Blaze ’33 Value Line Menu Overview Ordercode: 43324... -
Page 17: Main Menu Options
Vintage Blaze ’33 Value Line Main Menu Options DMX address DMX configuration Manual control tungsten lamp Outer ring, manual control Red LEDs Outer ring, manual control Green LEDs Outer ring, manual control Blue LEDs Center, manual control Red LEDs Center, manual control Green LEDs Center, manual control Blue LEDs Static preset colors Dimming curve tungsten lamp... -
Page 18: Manual Control Leds (Red) For Outer Ring
Vintage Blaze ’33 Value Line 4. Manual control LEDs (Red) for outer ring With this menu you can set the Red intensity of the LEDs. 01) Press the Menu button until the display shows 02) Press the Up and Down buttons to set the intensity of the LEDs. 03) The adjustment range is between , from minimum intensity to maximum intensity. -
Page 19: Static Preset Colors
Vintage Blaze ’33 Value Line 10. Static preset colors With this menu you can choose one of the 35 preset colors. 01) Press the Menu button until the display shows 02) Press the Up and Down buttons choose one of the colors. 03) The adjustment range is between 11. -
Page 20: Dmx Channels
Vintage Blaze ’33 Value Line DMX Channels 1 channel Channel 1 – Tungsten lamp white intensity 0-255 Gradual adjustment White from 0 – 100% 2 channels Channel 1 – Tungsten lamp white intensity 0-255 Gradual adjustment White from 0 – 100% Channel 2 –... -
Page 21: Channels
Vintage Blaze ’33 Value Line 4 channels Channel 1 – Tungsten lamp white intensity 0-255 Gradual adjustment White from 0 – 100% Channel 2 – Red Dimmer intensity All LEDs 0-255 Gradual adjustment Red from 0 – 100% Channel 3 – Green Dimmer intensity All LEDs 0-255 Gradual adjustment Green from 0 –... - Page 22 Vintage Blaze ’33 Value Line Channel 11 – Preset colors All LEDs (CH10 must be set between 1-255 No function 5-11 Color 1 12-18 Color 2 19-25 Color 3 26-32 Color 4 33-39 Color 5 40-46 Color 6 47-53 Color 7 54-60 Color 8 61-67...
-
Page 23: Maintenance
03) The LEDs. Return the Vintage Blaze to your Showtec dealer. 04) The internal fuse. Return the Vintage Blaze to your Showtec dealer. 05) If all of the above appears to be O.K., plug the unit in again. - Page 24 Check if power is switched on and One or more cables are plugged in fixtures do not function at all Internal fuse blown • Return the device to your Showtec dealer Fixtures reset The controller is not connected. • Connect controller correctly, but all 3-pin XLR Out of the controller •...
-
Page 25: Product Specifications
Vintage Blaze ’33 Value Line Product Specifications Model: Showtec Vintage Blaze’33 Value Line Input Voltage: 240V AC, 50/60Hz Power consumption: 680W (full output) DMX linking: 30 pcs Power linking @240V: 3pcs Protection rate: IP-20 Dimensions: 500 x 430 x 335 mm incl. bracket (LxWxH) -
Page 26: Dimensions
Vintage Blaze ’33 Value Line Dimensions Ordercode: 43324... -
Page 27: Notes
Vintage Blaze ’33 Value Line Notes Ordercode: 43324... - Page 28 ©2020 Showtec...