Table of Contents
Advertisement
Spectral M300 Q4 MKII
5. DMX configuration
With this menu you can set the desired DMX channel mode (personality).
01) While in main menu, press the
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the following DMX channel modes:
TOR:
9 channels
A1:
3 channels
A1d:
4 channels
A2:
4 channels
A2.d:
5 channels
6. Settings
With this menu you can set the device's settings.
01) While in main menu, press the
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the menus described below.
04)
If you choose
6.1. Upload
With this menu you can export current programs from the master device to the connected slave devices.
01) Press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Insert the password: UP>DOWN>UP>DOWN and press the ENTER button to confirm.
04) The display will show
05) While exporting, the devices will light up yellow.
06) If there are any problems with exporting, the master and the slave devices will light up red.
07) If the operation is completed successfully, the master and the slave devices will light up green and
the display will show YES.
6.2. Reset
With this menu you can reset the custom programs.
01) Press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Insert the password: UP>DOWN>UP>DOWN and press the ENTER button to confirm.
04) The display will show
Ordercode: 43560
UP/DOWN buttons
A2.S:
HSV:
UP/DOWN buttons
, you will return to the main menu.
.
and YES and the custom programs will have been reset.
until the display shows
6 channels
3 channels
until the display shows
.
.
17
.
.
Advertisement
Table of Contents
