Auto Programs; Dmx/Slave Mode; Dmx Address - SHOWTEC 43560 Manual

Spectral M300 Q4 MKII

2. Auto programs

With this menu you can choose one of the auto programs.
01) While in main menu, press the
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 10 uneditable built-in programs (A01-A10).
04) The device will now run the desired built-in auto program.

3. DMX/Slave Mode

With this menu, you can set the device as a slave.
01) While in main menu, press the
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the 2 following options:
DMX/Master Mode
Slave Mode
04) When the display shows
05) When the display shows
same as the master device.

4. DMX address

With this menu you can set the desired DMX address.
01) While in main menu, press the
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose the desired DMX address. There are 512 available DMX
addresses to choose from
Ordercode: 43560
UP/DOWN buttons until the display shows
UP/DOWN buttons until the display shows
, the device is operating in DMX/Master Mode.
, the device is operating in Slave Mode. It means that it will react the
UP/DOWN buttons until the display shows
.
16
.
.
.