AEG 68476IU-MN User Manual page 21

Table of Contents

Advertisement

Clock function
MINUTE MINDER
00:00
COUNT UP TIMER
9.2 Setting the DURATION
1. Set an oven function.
2. Press
again and again until
starts to flash.
3. Press
or
to set the minutes and
the hours for DURATION time.
4. Press
to confirm.
When the time ends an acoustic signal
sounds for 2 minutes.
setting flash in the display. The appliance
deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
to the off position.
9.3 Setting the END
1. Set an oven function.
2. Press
again and again until
starts to flash.
3. Press
or
to set the hours and
the minutes for END time.
4. Press
to confirm.
At the set time an acoustic signal sounds
for 2 minutes.
and time setting flash
in the display. The appliance deactivates
automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
to the off position.
9.4 Setting the TIME DELAY
function
1. Set an oven function.
Application
Use to set a countdown time. This function has no ef-
fect on the operation of the appliance. You can set the
MINUTE MINDER at any time, also if the appliance is
off.
If you do not set any other clock function the COUNT
UP TIMER automatically monitor how long the appli-
ance operates.
It is on immediately when the oven starts to heat.
The Count Up Timer cannot be used with the functions:
DURATION, END.
2. Press
3. Press
4. Press
5. Press
6. Press
and time
Appliance turns on automatically later
on, works for the set DURATION time
and stops at the set END time. At the set
time an acoustic signal sounds for 2
minutes.
display. The appliance deactivates.
7. Press any button to stop the acoustic
8. Turn the knob for the oven functions
9.5 Setting the MINUTE
MINDER
1. Press
2. Press
3. Set the hours.
4. The MINUTE MINDER starts
again and again until
starts to flash.
or
to set the minutes and
the hours for DURATION time.
to confirm. The display
shows flashing
.
or
to set the hours and
the minutes for END time.
to confirm.
and time setting flash in the
signal.
to the off position.
again and again until
"00" flash in the display.
or
to set the MINUTE
MINDER.
First you set the seconds, then the
minutes.
When the time you set is longer than
60 minutes,
flash in the display.
automatically after 5 seconds.
After 90% of the set time, an acoustic
signal sounds.
ENGLISH
21
and

Advertisement

Table of Contents
loading

Table of Contents